Have you been looking for the best arduino rc helicopter?
You’re Lucky! because we went out and did deep research on arduino rc helicopter available on the market, did a side-by-side comparison of thousands of items with various specifications and price tags then compiled the following list of the top-rated 10 arduino rc helicopter that you can buy confidently.
BEST 10 arduino rc helicopter [Our Recommendations]
Cool! Now that you have an idea about the products we are going to reveal in this blog post. let’s take a closer look at each pick of the best arduino rc helicopter, its specifications, and features.
MG90S 9g Servo Motor Micro Metal Gear for Robot Car Plane RC Helicopter Arduino
- MG90S Micro Servo Motor, updated SG90 serve motor.
- Stall Torque: 2.0kg/cm(4.8V)
- Operating Speed: 0.11 seconds / 60 degrees (4.8V)
- Metal Gear with less noise
- Structural Material: Aluminum metal teeth, coreless motor, double ball bearin
4Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat
- High quality and high cost performance.
- Operating speed: 0.1second/ 60degree ( 4.8V no load)
- Operating voltage: 4.8-6V
- Small size and light weight.
- Application: Used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.
Smraza 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Airplane Car Boat Control with Cable, Mini Servos for Arduino Project
$20.99 in stock
- SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi
- Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum angle: 120°
- Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 7 microseconds
- Amplifier Type: Analog controller. Operating Voltage: 4.8V～6.0V
- Please Note: The starting current of the motor should be greater than 1A. Comes with 1 year warranty and lifetime technical Support
Miuzei 5 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project
$11.99 in stock
- Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys and Arduino experiments
- Interface Type: compatible with JR & Futaba interface.
- No Load Running Speed: 0.09±0.01 sec/60° at 4.8V Rotary Angle: 120°
- Stall Torque (4.8V): 17.5oz /in (1kg/cm).Dead band width: 7usec
- Amplifier type:Analog controller Operating voltage: 4.8V～6.0V
Alinan 12pcs SG90 Micro Servo Motor 9G Mini Servo Kit Compatible with Arduino for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable
- ★Mini servo SG90 is tiny and lightweight with high output power. Alinan SG90 9g micro servos Stronger force-bearing capacity, not easy to deform, the metal material we used has higher hardness and abrasion resistant, Longer service life
- 【Applications】: SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments. SG90 9g servo support Arduino,Futaba, JR, Sanwa and Hitec remote system
- 【SG90 Servo Motor】: Stall Torque (4.8V): 17.5oz /in (1kg/cm); Operating voltage: 3.0V~ 6V; Amplifier Type: Analog Controller; Temperature range: -30 to +60; Dead band width: 7usec. No Load Running Speed: 0.09±0.01 sec/60° at 4.8V, Rotary Angle: 120°
- 【Interface Type】: This SG90 Servo Compatible With JR & Futaba Interface. The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9
- 【100% Satisfaction Guarantee】: We aim to make your work Easier & Funnier! If you encounter any problems in the use of welcome to consult with us, we are happy to solve all your troubles, please rest assured that the purchase
ALAMSCN 5PCS SG90 9g Servo Motor + 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit DIY Kit for RC Robot Arm Helicopter Airplane Car Boat Remote Control for Arduino for Raspberry pi
- These SG90 9G micro servo motors have a completely new redesigned PCB and control system to provide more accuracy.
- Its internal gearing and motor are also upgraded to improve dead bandwidth and centering.
- For SG90 9G micro servo motor is far more accurate and safe to use in aircraft which require precise servo movements and perfect centering.
- Apply to remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on Arduino ,Raspberry Pi.
- Package includes: 5PCS SG90 9g Micro Servo + 1PC PWM Servo Motor Driver. Cost-effective kit to meet your DIY needs.
CenryKay MG996R Servo Motor Metal Gear Servo Motor Torque Digital Servo Motor High Speed for Smart Car Robot Boat RC Helicopter Compatible Arduino (4PCS)
- This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase)
- The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc.
- Structural material: high-precision gear hobbing, hollow cup motor, double ball bearing
- Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects.
- Dimension:1.6*0.78*1.69inch .Package Content: 4Pack MG996R 55g Metal Gear Torque Digital Servo Motorue at 6V 12kg/cm, 7.2V 13kg/cm. (Recommended voltage: 5V, current usage: 3A ).
Miuzei 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project
- Application Fields: Miuzei SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments;
- Interface Type: This SG90 Servo Compatible With JR & Futaba Interface. Miuzei Micro Servo 9g no Load Running Speed: 0.09±0.01 sec/60° at 4.8V;
- Miuzei Micro Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm); Dead band width: 7usec; Amplifier Type: Analog Controller; Operating Voltage: 4.8V～6.0V;
- NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW Signal, Then it Will Be Work Normally;
- How to Reach 180 degree -- Miuzei SG90 9g Servo Motor Need to Meet 4.8V Power Supply Voltage and 2500usec Pulse Signal, the Angle of Rotation
DaFuRui 5pack MG90S Servo Motor， Mini 9G Micro Servo Metal Geared Micro Servo Compatible for Arduino RC Robot Helicopter Airplane Boat Controls
- ★Application Fields: remote control helicopters, micro robot, robot arm and boats，Interface Type: Compatible with JR & FUTABA interface
- ★Stall Torque: 2.2kg/cm(6V)；Metal Gear with less noise，Amplifier type: Analog controller
- ★Operating Speed: 0.1sec/60 degree(4.8V)~0.08sec/60 degree(6.0V)
- ★Operating Voltage : 4.8V~6.0V，The starting current of the motor should be over than 1A
- ★MG90S： micro servo motor used , aluminum metal teeth, coreless motor, double ball bearing. Updated SG90 servo motor
4PCS Servo Motor MG995 Control Angle180 Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter
$20.99 in stock
- This high-speed standard servo motor can rotate 180 degrees (90 in each direction).
- Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys.
- Connector wire length 300mm. Stable and shock proof double coreless motor, metal gear, ball bearing design,Through external adapter.
- Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.13s / 60 degrees
- This servo offers a full range of 180° with metal gears. Application:RC robot, airplane control, robot arm and boats. Fit for all kind of R/C toys and Arduino experiments.